Meter Nuts - 30LT
Meter nuts are used to connect straight and/or offset swivel gas fittings to the gas meter. Manufactured per ANSI B109.1.

Meter Plugs - 20LT
Meter Plugs are used to prevent the unintentional flow of gas from meter sets without meters attached. They also prevent insects and other foreign matter from entering the gas piping.

Gaskets for Meter Swivels - 20LT & 30LT
Gaskets are used to seal malleable iron offset or straight fittings on the face of the gas meter when tightening the swivel nut on meter thread of meter nut plug. These rubber gaskets made of Buna-N or neoprene are resistant to the action of matural and manufactured gases. The inside diameter is intended to lightly grip the pilot O.D. of the fitting to minimize problems during assembly of the swivel nut to the meter

6300 Series 3-Part Unions
3 Part Unions are designed to prevent electrolysis or other corrosive action in 3/4” or 1” gas service lines. They are resistant to most chemical substances, including gas, water and petroleum oils at  normal temperatures. Meets ANSI B1.20.1 standards.