Venting Victor offers several options for all your venting needs. Stocking manufacturers products such as New England Metal, Z-Flex and Simpson Dura-Vent, Victor ensures you have to correct venting when you need it.

New England Metals:

New England Metals provides quality single wall vent pipe for connections from your natural vent appliance to your masonry, b-vent, or flex vent chimney. Our vent pipe comes in 24 and 26 gauge and ranges in sizes from 3 inch to 24 inch

Z-Flex: (http://www.novaflex.com/productcart/pc/viewCat_P.asp?idcategory=17)

The Z-Flex line covers aluminum gas chimney liners and fuel oil stainless steel chimney liners from 3” to 10” diameter in 5 foot increments. (http://www.novaflex.com/productcart/pc/viewPrd.asp?idcategory=36&idproduct=390) AND( http://www.novaflex.com/productcart/pc/viewCat_P.asp?idCategory=38)These liners fit within a masonry chimney to ensure tight, properly sized venting for your heating equipment.

We also stock Z-Vent pipe and fittings. (http://www.novaflex.com/productcart/pc/viewPrd.asp?idcategory=39&idproduct=415) Z-Vent is a factory built, engineered AL29-4C special gas vent pipe, suitable for positive or negative pressure. Z-Vent is UL tested and listed to UL1738/S636. CAT II, III, IV venting approved. Z-Vent is typically used with positive draft appliances such as Modine’s Hot Dawg Heaters.
(http://www4.modine.com/v2portal/modine.portal?_nfpb=true&_pageLabel=modineMarketsDefault&a_webc_url=modine_com/markets/building_HVAC/market_level_3_content_013.htm)

Simpson Dura-Vent: (http://www.duravent.com/)

Simpson Dura-Vent is used for gas B Vent, gas Direct Vent Pro and DuraTech all-fuel vent applications.

B-Vent: (http://www.duravent.com/?page=5.php)

Type B Gas Vent is the Contractor’s Choice for minimizing the effects of condensation on the appliance and the vent system. Type B Gas Vent is suitable for use in low heat gas-fired appliances. It is available in 3 inch to 30 inch diameter and is UL and ULC approved.

Direct Vent Pro: (http://www.duravent.com/?page=3.php)

Direct Vent Pro is designed for use with direct heaters, stoves, and fireplaces. It is laser-welded and requires no gaskets or sealants. It is specified exclusively to nearly every stove and fireplace manufacturer in the US and Canadian market. Direct Vent Pro is UL approved.

DuraTech: (http://www.duravent.com/?page=1a.php)

DuraTech is an all-fuel chimney system designed for appliances that require a UL 103 HT chimney system such as woodstoves, fireplaces, furnaces, boilers, stoves, ranges, waterheaters, or other appliances fueled by wood, oil coal or gas and zero clearance fireplaces that are factory-built. It is available in 5 inch to 16 inch diameter.

The people at Victor understand that the only acceptable venting system is a system designed and installed correctly. Let us work with you to make sure you have the equipment and information you need to get the job done right the first time.